manufacturer exporters of all type of scientific instruments

• Soil Testing Equipments
• Cement, Concrete, Aggregate
• Material Testing Machine
• Bitumen Extractor Hand Operated
• General Laboratory Testing Equipment
• Siever Shaker
• Sand Pouring Cylinder Conforming TO IS 2720 (P-XXVIII)
• Proctor Compaction Apparatus Conforming TO IS 2720 (P-V)
• Rapid Moisture Meter Conforming TO IS 2720 (P-II)
• Laboratory C.B.R Test Apparatus Conforming To Is (P-XVI), 9669-80

These products are being largely used in the construction industry. Capable of yielding accurate results, these rapid moisture meters are apt for measuring the moisture for determining the moisture level in soils. For quick determination of moisture content of materials in powder form viz. soil, sand, coal, pottery slip, cement etc. Calcium Carbide when comes in contact with moisture acetylene gas in generate. This principle is used in Rapid Moisture Meter. A weighted quantity of sample is mixed with fixed quantity of Calcium Carbide reagent and the whole mixture is thoroughly shaken in a vessel to which a pressure gauge is fixed. The acetylene gas produced developed pressure and pressure gauge is calibrated to read percentage moisture. The instrument indicates moisture on wet/weight BLS easily convertible to dry weight basis.

The unit consists of a pressure vessel with clamp for Sealing cap, rubber sealing gasket, pressure gauge calibration in percentage moisture content 0-25% on the wet weight basis (6gm) counter poised balance for weighing samples, scoop for measuring reagent carbide, bottle of reagent carbide and cleaning brush. Complete in highly polished wooden carrying case with handle. The unit can be used to determine percentage moisture content on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis. Same as above but 0-50% moisture meter also available, dia 4.89 kg weight with 450 mm Controller Fall (For Heavy Compaction).

We offer C.B.R (California Bearing Ratio) test apparatus for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. Being precision engineered, these CBR test apparatus ensures better performance as well as clean observations. These are available in both standard and custom specifications to suit various industrial needs.

The set comprises of Proctor Compaction Mould 100 mm internal dia x 127.3 mm ht. with 1000 cc volume. Made of Gun Metal / Mild Steel with collar and base plate and Rammer 50 mm dia 2.6 kg weight with 310 mm Controller Fall (For Light Compaction).

• 50 KN (5000kgf) Capacity with Strain Rate of 1.25 mm per minute.
• Load Frame, Electricity cum Manually Operated 220V, Single Phase AC Supply.
• CBR Mould with collar and base plate.
• Penetration Piston, 50 mm dia with bracket.
• Perforated Brass Swell Plate with stem and locknut.
• Displacer Block 148 mm dia with T-Handle.
• Annular & Slotted Metal Weight 2.5 kg
• Aluminum Tripod Stand.
• Rammer 50 mm internal dia 2.6 kg & 4.89 kg.
• Proving Ring 10 KN capacity with Calibration Certificate in teak w2ooden carrying case.
• Dial Gauge 0/01 mm x 25 mm travel.